boiler accidents

Prevent Boiler Tube Overheating Failures

Overheating in boiler tubes occurs when the temperature of the tubes increases beyond the recommended operating temperature for an extended period of time. This can be caused by several factors, including poor combustion, insufficient cooling, inadequate water treatment, or other operational problems. When boiler tubes overheat, their material strength can decrease, leading to deformation, cracking, and eventual failure. Two main types of overheating can occur in boiler tubes: 1. Short-term2. Long-term overheating A) Short-Term Overheating Occurrence It occurs when the temperature of the tube exceeds the recommended operating temperature for a short period, typically due to a sudden increase in heat input or a decrease in cooling flow. Results This type of overheating can result in the following issues:    1. Thin-Lipped, Longitudinal Rupture: This occurs when localized overheating causes a weakened area of the tube to rupture along its length, resulting in a thin-lipped, longitudinal rupture. This type of rupture can be caused by issues such as flame impingement, overheated refractory, or blocked cooling water. 2. Extensive Tube Bulging:  This occurs when localized overheating causes the tube to expand beyond its normal diameter, resulting in extensive tube bulging. This type of bulging can be caused by issues such as restricted water flow, inadequate cooling, or flame impingement. 3. Large Fish-Mouth Appearance: This occurs when the tube end opens up like a fish’s mouth due to pressure build-up caused by localized overheating. This type of appearance can be caused by issues such as blocked cooling water, insufficient water flow, or overheated refractory. Causes There can be several typical causes of short-term overheating in boiler tubes, including: 1. Flame Impingement: This occurs when the flame comes in direct contact with the tube surface, causing localized overheating and potential damage. 2. Blocked Cooling Water: This can occur when the cooling water is blocked or restricted, reducing the cooling effectiveness and causing localized overheating. 3. Inadequate Cooling: This can be caused by issues such as low cooling water flow or insufficient cooling water velocity, resulting in localized overheating. 4. Overheated Refractory: This can occur when the refractory material surrounding the boiler tubes becomes overheated, causing localized overheating and potential damage to the tubes. 5. Fouling or Scaling: This occurs when deposits such as mineral scale or corrosion products build up on the tube surface, reducing heat transfer and potentially causing localized overheating. B) Long Term Overheating Occurrence Long-term overheating occurs when the temperature of the tube is consistently higher than the recommended operating temperature over an extended period. Results This type of overheating can result in the following issues:  1. Little to Moderate Bulging: Long-term overheating can cause gradual deformation of the tube, resulting in little to moderate bulging. This can occur due to factors such as inadequate cooling, high-temperature gradients, or insufficient tube wall thickness. 2. Little to Moderate Reduction in Wall Thickness: Long-term overheating can also cause a gradual reduction in the thickness of the tube wall due to thermal degradation. This can occur due to factors such as exposure to high temperatures or corrosive gases. 3. Typically accompanied by thermal oxidation: Long-term overheating can lead to thermal oxidation, a chemical reaction that occurs when metal is exposed to high temperatures and oxygen. This can cause further degradation of the tube material and increase the risk of failure. 4. Found in Superheaters, Reheaters, Waterwalls: Long-term overheating is typically found in components such as superheaters, reheaters, and waterwalls, which are exposed to high temperatures and pressures over long periods of time. These components are crucial for efficient boiler operation, and their failure can lead to costly downtime and repairs. Causes There can be several typical causes of short-term overheating in boiler tubes, including: 1. Insufficient Cooling: This can occur due to factors such as low cooling water flow rate, high water velocity, or inadequate cooling surface area. Over time, this can lead to a gradual increase in tube wall temperature and degradation of the tube material. 2. Inadequate Tube Wall Thickness: Tubes with insufficient wall thickness are more susceptible to long-term overheating due to their reduced ability to dissipate heat. This can occur due to factors such as inadequate design, corrosion, or erosion. 3. High Temperature Gradients: Large temperature differences between the tube wall and the surrounding fluid can cause thermal stresses that lead to long-term overheating. This can occur due to factors such as uneven heat distribution or changes in operating conditions. 4. Corrosive Gases: Exposure to corrosive gases such as sulfur dioxide, hydrogen sulfide, or chlorine can lead to gradual degradation of the tube material over time, increasing the risk of long-term overheating. 5. Design Issues: Poor design or inadequate materials selection can lead to long-term overheating in boiler tubes. This can occur due to factors such as inadequate consideration of temperature and pressure conditions, or improper material selection. Conclusion In conclusion, preventing boiler tube failures caused by overheating is crucial for ensuring safe and efficient boiler operation. It requires identifying and addressing the various causes of short-term and long-term overheating. As a leading provider of innovative and high-quality boiler solutions, Solarkaz International understands the importance of proactive maintenance and monitoring to prevent overheating and tube failures. By implementing best practices and leveraging the latest technologies, Solarkaz International helps its clients minimize downtime, increase reliability, and extend the lifespan of their boiler systems.

Prevent Boiler Tube Overheating Failures Read More »

10 Boiler Safety Preventions You Should Know

Boilers are the most critical elements within an industry. Specially the boilers that are being used without a standby unit/boiler, having low or no maintenance specially in the case of any fuel other than Natural Gas. What are the Main Causes of Boiler Accidents? Major causes of boiler accidents can be due to failure of pressure parts of steam and water sides, safety valves failure, corrosion and degradation of boiler wall material, loose welded and non-tested joints. The probability of which is very low (ONLY 0.5% OF THE ACTUAL ACCIDENTS) when you get your boiler for an Authorized Manufacturer complying to all the latest code construction of boilers such as ASME SEC I Div.1.   Poor water treatment causing scaling and overheating of the plates, Low water levels, un-trained boiler operator, improper cleaning of the boiler furnace (WHEN IT COMES TO BIOSMASS FIRED BOILERS). According to inspection records of various sources in the U.S., UK, and Europe in the late 19th and early 20th centuries the weakening of boilers due to simple scaling both water side and fired side was the most frequent cause of boiler accidents. Also nowadays many unauthorized and illegal boiler alteration shops are manufacturing boilers which are very harmful, not only for the company also for the lives of the people as they are prone to catastrophic explosions. Hence, while buying boilers one should consider the certified boiler manufacturers over the local manufactures. For clear understanding of failure associated with the boilers, an Ishikawa diagram for the root cause failure analysis of a steam boiler failure is shown below:   Some of other related failure causes are as follows: Pressure Vessel Failure (OPERATIONAL ERROR / UNTRAINED STAFF) The most common reasons for pressure vessel failure are excessive scale formation both water and fire side, low water levels, or corrosion or overheating of the metal. Damaged safety valves or water hammer may also have an effect on the vessel. When the vessel’s pressure range is compromised, it happens. To better grasp it, consider that a steam boiler working at 100 psig may expand water by a factor of 1500 from its initial volume. As a result, it generates a powerful force that results in dangerous boiler accidents.       Boiler Corrosion Untreated water contains a sizable amount of dissolved oxygen, which is a major contributor to corrosion. The oxidation, scaling, and corrosion processes are accelerated by the high heat intensity of evaporation. Pitting corrosion causes boiler tube failures and may harm the equipment farther downstream. Accidents Due to Scaling on Furnace of Water Tube Boiler Running on Solid Fuel / Biomass It is observed that when a boiler is operated on any solid fuel or biomass and the quality of the fuel is not controlled; unwanted deposits start to occur on the surface, walls of the furnace which results in poor heat transfer. If the boiler furnace is not properly cleaned than this results in overheating of the boiler resulting in hardness in material and cracking of water wall tubes of the furnace. This is the most common accident that is faced by companies who have untrained boiler operational staff. Accidents Due to Choking of Furnace of Boiler Running on Solid Fuel / Biomass It is observed that when a boiler is operated on any solid fuel or biomass and the quality of the fuel is not controlled i.e. sand, plastic or any item that has a higher melting point or cannot be burned other than the fuel being used for e.g. the roots of the tree the air nozzles on the bed of the furnace get chocked. If not properly cleaned that this will result in the overheating of the furnace bed of the boiler and ultimately result in a severe accident of the boiler. This is also a common accident that is faced by companies who have untrained boiler operational staff Prevention of Boilers From Explosion Following are some of the key parameters that can prevent Boilers from explosions: Regular Checking of Safety valves Proper insulation of heated parts of the Boiler Pressure Gauge monitoring Boiler ash tray and tubes cleaning on periodical basis to prevent them from scale formation Periodic maintenance of Boilers Proper treatment of Water before entering into the Boiler Boiler should not be operated at or above the maximum allowable pressure limits Boiler vents checking Check for LEL level and fuel line leakages before the ignition Trained and educated operational staff (most important)

10 Boiler Safety Preventions You Should Know Read More »